Compensation: Up to $40.00/hr DOE REPORTS TO: Fabrication Supervisor SUPERVISES: N/A AUTHORITIES / RESPONSIBILITIES: Technically proficient in tasks, work processes, and equipment operation. Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. Creates a working environment compliant with quality, safety, environmental, and health regulations and policies. Rigs plates and equipment safely. Understand directions and follow instructions. Maintains cleanliness and organization on assigned job sites. Accountable for completion of daily work assignments including the completion and signatures for work completion and quality. Performs safe and effective use of craft related tools and equipment, including but not limited to: milling discs, sanders, grinders, burr motors, band saws, skill saws, saws all, cutting torches, arc gougers, plate magnets, general fitting aids, come along and chain falls etc. Obtain GMAW ABS ‘B’ Class Weld Certification for aluminum applications and/or FCAW/GMAW B class weld certification for steel applications. Performs basic layout of plates, materials and weldments using basic engineering sketches, drawings, and diagrams with minimal supervision. Performs shipfitting functions such as but not limited to fit up of structure, cutting, sniping, sanding, grinding, arc gouging and back gouging of steel welds through mechanical, flame, and ARC gouging processes, prepping, (Including paint removal in way of any weld), tacking and the fit up of plates with minimum supervision. Performs fitting operations with limited supervision using standard shipfitting equipment to accomplish fabrication and ship repair duties. Monitors working environment for compliance with quality, safety, environmental and health regulations. Monitor steel preheat, inner pass temps, heat input, and ensure that all are within the parameters of the applicable steel welding procedure. Monitor steel heat distortion and apply appropriate changes to counteract. Monitor heat shrinkage during the fit and weld process and apply appropriate changes to control the shrinkage. Must be willing to work with and train lower-skilled workers. May be assigned to work any shift. May be assigned additional tasks including outside the craft as required. Must comply with the Company’s “Equal Opportunity and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be professional and free of bias, prejudice, and harassment. QUALIFICATIONS / KNOWLEDGE / EXPERIENCE: Minimum 1 year as a B-Class Fitter at Austal or 2 years in a related industry required. Pass approved A-Class Fitter Test for Aluminum and/or steel. Must demonstrate an acceptable proficiency and competency to Austal Supervision for an A-Class Fitters position. Must demonstrate ability to interpret and work from construction drawings, job specifications, instruction manuals, manufacturer’s handbooks, change order, and contract specifications. Thorough knowledge of equipment, work processes and techniques used in measuring, and fitting of aluminum and/or steel components, modules and vessels. Ability to add, subtract, multiply, divide, and measure using the metric system. Knowledge of shipyard terminology such as general ship structure and vessel layout. Knowledge of edge preparation and weld joint details. Advanced working knowledge of engineering drawings and sketches. Ability to work any shift or overtime as required by management, schedule must be flexible. TOOLS: As directed by Supervisor DIRECTION EXERCISED: N/A DISCRETION EXERCISED: N/A LIASES WITH: Production Department Supervisors and Foremen, Health, Safety and Environmental ADDITIONAL GUIDELINES: Candidates must meet the following employment eligibility guidelines to be considered for employment with Austal USA: 18 years of age or older at time of application Able to provide proof of US Person Status No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date No felony convictions of Drug crimes within three years from disposition date Willing to submit to a drug screen Willing to submit to a background check The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include the following: Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Ability to turn body at the waist from side to side and about the vertical axis. Lift/push/pull 50lbs to 75lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to safely and appropriately use required tools and equipment. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. Equal Employment Commitment Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: 251-445-1932. Austal’s commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion. Austal USA is a ship manufacturer headquartered in Mobile, Ala., with service centers in San Diego and Singapore and a technology center in Charlottesville, Va. With the most modern steel panel line in the shipbuilding industry, Austal USA’s facility is capable of supporting the manufacture of both aluminum and steel ships. Austal USA leverages a moving module production line and strict adherence to lean manufacturing principles to consistently deliver on-schedule and on-budget. Austal USA is currently under contract for several programs, including the U.S. Coast Guard’s Heritage-class Offshore Patrol Cutter (OPC), the TAGOS-25 ocean surveillance ships, the Spearhead-class Expeditionary Fast Transport (EPF), the Navajo-class Towing, Salvage and Rescue ships (T-ATS), the Expeditionary Medical Ship (EMS), the Auxiliary Floating Dry Dock Medium (AFDM), and the Independence-variant Littoral Combat Ship (LCS), and is supporting Navy unmanned vessel programs leveraging its advanced machinery control system. Austal USA’s service business provides global support to U.S. Navy, Military Sealift Command and other customers. Austal USA’s San Diego Service Center includes a waterfront facility that will have the capability to drydock small combatants and similar sized ships. Earning 23 safety excellence awards, Austal USA continues to be one of the safest shipyards in America.

A Class Structural Fitter.

more at Austalusa.

ACCURACY CONTROL INSPECTOR II

Technical Training and Testing Instructor - Structural Welding EB (Weekend Shift)

Technical Training and Testing Instructor - Structural Welding EB (Day Shift)

similar roles.

Assistant Manager, FX Business Operations and Management

Executive Assistant, Senior Executive – I

Senior QC & Process Executive

HR Manager

Senior HR Business Partner

Manufacturing Operations Manager ( 11.30pm to 9am)