The University of Southern California (USC) department of Facilities Planning & Management (FPM) is seeking a Locksmith – Module C to join its team. The Work You Will Do The Locksmith – Module C performs standard and advanced locksmith procedures including but not limited to high security keying, creation and maintenance of master key systems, low voltage access control. Determines need to repair and/or replace equipment. Estimates materials required for specific job components. Performs all appropriate module tasks and demonstrates proficiency as outlined in the Locksmith Pay for Skills section, independently or as part of a team, as assigned by the supervisor. Repairs, installs and re-keys all mechanical type locks, electrified hardware and access control locks. Maintains key records and orders materials as required. Trains journeymen and other employees specific skills and tasks as required. Provides leadership and guidance to journeymen and Zone Maintenance Technicians. The Locksmith – Module C: Provides leadership and guidance to others who perform similar work. Sets priorities and timelines and monitors the work of others. Performs all necessary alterations, maintenance and repair work on University lock systems. Installs panic hardware, locksets and electrical releases. Works from blueprints, specifications and plans. Operates key cutting and code cutting machines. Estimates materials required for specific job components. Maintains clean job site throughout duration and cleans up job site following work completion. Maintains safe working conditions for self and others. Stores and maintains supplies, tools and equipment. Trains other journeymen, Zone Maintenance Technicians, or other employees’ specific skills and tasks, as required. Identifies additional training or defines needs for new or continuing training which would benefit staff. Prepares reports and/or maintenance records, as needed. Perform all necessary alterations, maintenance and repair on access control systems. Install electrified hardware and access control locks (standalone and hardwired). Experience with High Security Key Systems. Ability to rekey High Security Cylinders. Operate key cutting machines for high security cylinders. In the event of an emergency, the employee holding this position is required to “report to duty” in accordance with the university’s Emergency Operations Plan and/or the employee’s department’s emergency response and/or recovery plans. Familiarity with those plans and regular training to implement those plans is required. During or immediately following an emergency, the employee will be notified to assist in the emergency response efforts, and mobilize other staff members if needed. Performs other related duties as assigned or requested. The university reserves the right to add or change duties at any time. Benefits USC’s Commitment to You: We offer an excellent package of benefits and programs including, but not limited to: Tuition assistance for you and your family Comprehensive health, dental and vision insurance options 403b retirement account with matching 5% contribution by USC 50% subsidy off Metro, LADOT, and Metrolink passes Explore more on the USC Employee Gateway Hourly Range The hourly range for this position is $: 32.59 - $37.72. When extending an offer of employment, the University of Southern California considers factors such as (but not limited to) the scope and responsibilities of the position, the candidate’s work experience, education/training, key skills, internal peer alignment, federal, state, and local laws, contractual stipulations, grant funding, as well as external market and organizational considerations. Job Qualifications The ideal candidate for the position of Locksmith – Module C meets the following preferred qualifications: Related Undergraduate Study Experienced with troubleshooting, maintenance and repair for Automatic Door Operators and Access Control Systems (hardwired and standalone) Experienced with High Security Key Systems. Ability to rekey High Security Cylinders. Familiar with ADA, Fire Door, and Life Safety Codes. Familiar with OSHPD and JCAHO rules and regulations pertaining to health facilities. All candidates for the position of Locksmith – Module C must meet the following minimum qualifications: High School Diploma or equivalent and completion of four-year apprenticeship program 5 Years of journeyman experience Four years’ experience as a trade-related trainee may substitute for completion of a four year apprenticeship program Experience performing standard trade-related procedures. General knowledge of trade-related methods, materials, tools, and equipment. General knowledge of industrial/commercial locksmithing. Experience operating key cutting and code cutting machines. Experience maintaining records and preparing reports. Familiar with city and state building codes, OSHA rules and regulations, standard safety practices and equipment, and other requirements for workplace safety. About USC FPM FPM (formerly named Capital Construction & Development / Facilities Management Services) is responsible for planning, developing, and maintaining the breadth of the facilities at USC, and is also dedicated to creating a safe environment for our USC community. Woven into every service, safety is of upmost importance. As FPM, this diverse group of innovative and talented professionals provide high quality facilities construction, operations and maintenance services at USC and serve as dedicated stewards of USC and FPM core values. FPM values employee recognition, accountability, collaboration, respect, and trust. Come and join the FPM team – a team that works as trusted partners shaping an environment of innovation and excellence. Apply today! High School Diploma or equivalent and completion of four-year apprenticeship program 5 Years of journeyman experience Four years’ experience as a trade-related trainee may substitute for completion of a four year apprenticeship program Experience performing standard trade-related procedures. General knowledge of trade-related methods, materials, tools, and equipment. General knowledge of industrial/commercial locksmithing. Experience operating key cutting and code cutting machines. Experience maintaining records and preparing reports. Familiar with city and state building codes, OSHA rules and regulations, standard safety practices and equipment, and other requirements for workplace safety. USC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other characteristic protected by law or USC policy. USC observes affirmative action obligations consistent with state and federal law. USC will consider for employment all qualified applicants with criminal records in a manner consistent with applicable laws and regulations, including the Los Angeles County Fair Chance Ordinance for employers and the Fair Chance Initiative for Hiring Ordinance, and with due consideration for patient and student safety. Please refer to the Background Screening Policy Appendix D for specific employment screen implications for the position for which you are applying. We provide reasonable accommodations to applicants and employees with disabilities. Applicants with questions about access or requiring a reasonable accommodation for any part of the application or hiring process should contact USC Human Resources by phone at (213) 821-8100, or by email at uschr@usc.edu. Inquiries will be treated as confidential to the extent permitted by law. Notice of Non-discrimination Employment Equity Read USC’s Clery Act Annual Security Report USC is a smoke-free environment Digital Accessibility If you are a current USC employee, please apply to this USC job posting in Workday by copying and pasting this link into your browser: https://wd5.myworkday.com/usc/d/inst/1$9925/9925$155582.htmld USC is a leading private research university located in the heart of downtown Los Angeles – a global center for arts, technology and international business. As the largest private employer in the city – responsible for more than $5 billion annually in economic activity in the region – we offer the opportunity to work in a dynamic and diverse environment, in careers that span a broad spectrum of talents and skills. As a USC employee, you will enjoy excellent benefits and perks, and you will be a member of the Trojan Family - the faculty, staff, students and alumni who make USC a great place to work. Application help If you need assistance during the application process, see our application help. (If you already work for USC, see Your USC career.) At any point you may also contact our HR Service Center for help at (213) 821-8100 or uschr@usc.edu. Don't see the dream job you are looking for? Drop off your contact information and resume and we will reach out to you if we find the perfect fit!

more at usc.edu.

20 Oct, 2026

usc.edu

Postdoctoral Scholar - Research Associate - Cancer Genomics and Therapeutics

Los Angeles +2

Salary not listed

more at usc.edu.

Postdoctoral Scholar - Research Associate - Cancer Genomics and Therapeutics

Manager, Sterile Processing - Sterile Processing - Full Time 8 Hour Days (Exempt) (Non-Union)

RN Clinical - Pre-Post Op HC4 - Full Time 10 Hour Rotating Shifts (Non-Exempt) (Union)

similar roles.

Manager, Safety Analytics

Customer Service/Ground Operations Agent - PSC

Senior Demand Planner

Payroll Technology Specialist

Security Enablement Engineer

Security Officer-Armed-PRN

more at usc.edu.

Postdoctoral Scholar - Research Associate - Cancer Genomics and Therapeutics

Manager, Sterile Processing - Sterile Processing - Full Time 8 Hour Days (Exempt) (Non-Union)

RN Clinical - Pre-Post Op HC4 - Full Time 10 Hour Rotating Shifts (Non-Exempt) (Union)

similar roles.

Manager, Safety Analytics

Customer Service/Ground Operations Agent - PSC

Senior Demand Planner

Payroll Technology Specialist

Security Enablement Engineer

Security Officer-Armed-PRN